Questions & Answers for: Honda VF 750 S slack in gears

...Check the ignition timing. If the spark is too early it will rattle the bike. Also, take the slack out of the cam chain. There could be some pre-ignition going on but doubtful. Try a couple ...

Ad

Question about 1984 VF 750 S

1 Answer

Problem with the shifting First gear catches fine, 2nd,3rd,4th and 5th gear sometimes slip into Neutral. 6th gear is fine. Had a problem ever since I laid it down, I think the shift bar hit the ground

Ad

Question about 1984 VF 750 S

1 Answer

Honda V45 magna won't turn over My 84 Honda V45 Magna ran out of gas and backfired. Since then, the starter will not turn. Battery good, lights work when key is on, etc. Did the starter gear get ...

can I use gl-5 80 90 wall-mart brand gear lube in my 1982 v-45 750 honda sabre if the bike is a shaft drive,then the oil you are referring to is a gear oil only,will be fine in the rear drive unit as ...

transmission whines in chilly weather, whine starts arnd 3rd gear whines when traveling, whine starts around 3rd gear at 20mph, then progresses through the gears until hot. always pulls good and ...

Engine dies as soon as I put it into gear. The engine dies as soon as I put it into first gear from neutral... Also for some reason since I put the carbeurator back in(how all of this came about) I ...

Question about 1982 VF 750 S

1 Answer

...down the teeth of the sprocket. When this is happening notice if the chain is getting tight than slack, then you know you have a stretched chain (maybe only a 1 foot section). Replace the chain.

Question about 1984 VF 750 S

2 Answers

My trip meter does not count mileage. It is lit up but stays all 000s. G'day. If your trip meter stays at zero,but your speedo works(tells the speed still)then the problem is an internal gear ...

how can you tell if the shifter fork is broke 82 honda magna 750 wont change gear and will sound like rocks rattleing in a coke can

1982 Honda VF 750 S should there be slack in oil pump chain? oil pump chain is really slack and I suspect it is the cause of a rattle in the clutch casing when shutting off the throttle to change gear

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...