Questions & Answers for: size of bolt on brake caliper

Question about 1999 Silverado 1500

1 Answer

...size tool i need to take caliper bolts off on the front of a 2002 chevrolet 1500 4x4?? Sometimes they use a T-50 torx bit, and sometimes they use either a 15mm or 18mm bolt, however the caliper ...

Ad

...bolt. Using a brake caliper retraction tool, select the appropriate sized piston press arbor and install the tool onto the brake caliper. Following the tool manufacturer's recommendations, use the ...

Ad

...SIZE C-CLAMP TO PUSH IN THE CYLINDER ON THE CALIPER , AND HIGH TEMP BRAKE GREASE TO PUT ON CALIPER BOLTS WHEN RETIGHTENING. HOPE THIS HELPS CRAIG. HERES A LINK TO LOOK AT I FOUND TOO!! ...

...size but one has a rubber sleeve at the end and the other does not. Thanks Doug They should both have rubber sleeves. It keeps 'gunk' out of the caliper area for the caliper bolt. (The hole) Is the ...

size of the bolts that hold on the brake caliper housing and the bolts that hold on the brake caliper I believe the brake caliper bolts at the slides are 13MM hex and the bracket bolts are either 18MM

...to big. I tried all standards too. Could you please tell me what size the front caliper bolts are supposed to be. Its a 2006 Escape 3.0 4X4. I would appreciate your help. Please try a TRX --E10 ...

Question about 2003 Silverado 1500

1 Answer

...size of the two bolts which bolt the right rear brake caliper bracket to the backing plate on a 2003 chevrolet silverado What size are the bolts? Did you break them? Your local part store will have ...

...size wrench for those two bolts (possibly 10 mm), remove them, and the caliper is free except for the brake hose leading to it.  If removing completely from the car, remove the brake line at the ...

2004 Santa Fe 2.7L cdx REAR CALIPER SLIDING BOLT SIZE rear brake caliper sliding bolt size measures 8mm x 29mm with 14 mm head with flange marked 10 Is there a question there

...size caliper bolt in a 2009 Hyundai Elantra? I am replacing the rotors. What size and type of wrench do I need? 12 mm ,14,mm wrench or socket that to remove the caliper 17 mm wrench or socket for the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...