...Singer sewing machine model #5932. The lever that brings the presser foot up and down isn't working. The presser foot stays down and the lever isn't working to bring it back up. How can I fix this ...
Question about 5050 Mechanical Sewing Machine
...singer sewing machine came to me from a friend. It doesn't have a model number on it, neither does any of the accompanying literature... manuals, instruction sheets indicate what model it is, so I ...
Question about 5050 Mechanical Sewing Machine
...Singer 9432 has come disconnected from the presser foot. 2 problems. First, I'm trying to take the cover off so I can figure out where the lifter should go, but I can't get the top cover off the ...
Question about 7462 Mechanical Sewing Machine
...holds the presser foot shank to the presser bar. When the presser foot shank is lowered, it snaps onto the presser foot. See page 26 of the manual - ...
...the presser foot and pull out 8" of thread. Lower the presser foot and try sewing. If this does not solve the problem the timing may need adjusting and this should be done by a Singer repair
Question about 972 Mechanical Sewing Machine
...Singer 972 sewing machine. T... I have a problem with Singer 972 sewing machine. The bobbin stitch is too lose and how can I fix it? Always thread a sewing machine with the presser foot up and this ...
...singer simple 3116 sewing machine Hi! I have a singer simple 3116 sewing machine and whenever I try to stitch with it the thread gets stuck; the stitch in the back of the fabric is all tangled ...
Question about Izek Computerized Sewing Machine
...machine runs one stitch at a time slowly...it can be set at any mode slow or rabbit...what can i check? I tried another presser foot and it still runs the same way. Call Singer customer service at ...
Singer Curvy 8770 as gift. Trying to use for first time and thread on underside of stitches is loose. Have tension on top dial as far as 9. I hve been sewing for forty+ yrs. Try this, totally rethread
Question about Curvy 8770 Electronic Sewing Machine
Singer Model #7426? Could be the presser foot is not applying enough pressure to the feed dogs. Check your owner manual for instructions on increasing the presser foot pressure. Could also be that the
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions