Questions & Answers for: simmer switch

Question about Kitchen Ranges

1 Answer

...range too hot Hsa control 1-6 simmer, bake and roast. When only on number 1 it is too hot and should only be at least on simmer. Help ! Sounds like a bad infinate switch. Replace the switch ...

Ad

Question about Cooktops

1 Answer

...simmer, it is on high. It will only lower the heat whe the dial is at the lowest setting, right before OFF. Can you tell me what is wrong. Thank you, Lawrence Switch that controls that burner is bad ...

Ad

Question about KERC500 Electric Kitchen Range

1 Answer

simmer switch is in the off position, I just had the same problem and checked it back to the power connector and only had 120 V ????, I about to take the switch out and then saw the simmer switch that

Question about KERC500 Electric Kitchen Range

1 Answer

...simmer select off, there is another, lounder click. Don't want to replace the switch if its okay, alrewady made the mistake of doing so with the element, and can only deduce it's the circuit board. ...

Question about KERC500 Electric Kitchen Range

1 Answer

...switch for simmer, or B- element itself. The element itself is no more than a thin ribbon that can fail occasionally. The switch controls two circuits in the large element. Find a good tech that can ...

Question about KERC500 Electric Kitchen Range

1 Answer

...be so hot? simmer is actually medium high rather than simmer The switch itself is what cycles the burner to come on/off. If it is acting up, you,ll need to replace the switch that controls the

Question about KESA907PSS Electric Kitchen Range

1 Answer

burner turns itself off on KESA907 I had soup simmering and saw that the burner indicator light was off. Soup also had stopped simmering. I turned it back on and within a minute or two it turned ...

Question about RGS-305 Professional Gas Kitchen Range

2 Answers

...switch on top burner will not shut off try thoroughly cleaning the burners, particularly the holes in the ring that the gas come through. The gas come through to heat the ignitor so that the ignitor ...

Question about RGS-305 Professional Gas Kitchen Range

1 Answer

switch activated conducting a voltage check between P3 on simmer control board and white contact on indicator light, do you get 43 volts? I should be getting at least 120 volts and I'm not. Would this

...switch with 0/1/11 positions with no timer. I assume it means off/slow/fast settings. Am I correct in this assumption? Correct, if it is like this one. You can test it by pouring in a kettle of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66853 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...