Questions & Answers for: Kenwood shut voice

...shut down with everything remaining in the open position. The same thing habbens with a different mainboard, so I *think* I've got it narrowed down to the sub-assembly that is responsible for moving ...

shut off at mid volume?turned radio down it turned back on. im sure i wired it correctly!is it the amp or is my altenator starting to fail battery is a week old.its in a 88 crx si dont know what to do

...shut off after about five minutes Make sure your speaker load is right. When you use dual voice coil speakers or more than one speaker per channel and such it can get pretty confusing. If you are ...

shut off and hit pretty well for long periods of time. If you are running two dual voice coils. Bridge amp, run pos and neg to pos and neg outside of box. neg and pos to one side of sub The other side

...resistance value so if the amplifier thinks its feeding a short circuit, will "protect" itself by shutting off. Check wiring carefully and each speaker at a little lower volume for sounds of ...

...sound Kenwood just shut off about week ago tried resetting nothing happened. Turn my truck on the other day kenwood is working but w/ no sound at all. go through your menus, you have muted your

voice prompt NAV and is set for the radio music to turn off when she gives direction. But when the music goes down for her to speak nothing comes out?? Don't understand... Thanks for your help. Gisele

shut off. Okay, could be a couple of things. First thing for me to ask is do you use speakers with dual voice coil? If so you should find out if your amp supports that. If not you should run your subs

...amp model stated at all (vast there are) wild guess speaker or wires to them shorted or open. Try shutting off and hooking one spk up at a time. My guess is shorted voice