...shift lever to 4th gear.depress clutch to if necessary to shift.move the shift lever to the 4th gear position until contacts stop.then you turn the adjuster turn buckle so the shift cable eye aligns ...
...shift lever stud ball. Install the retainer to the shift cable and transmission bracket. Feed the shift cable through the floor panel. Lower the vehicle. Adjustment Procedure Ensure that the shift ...
SHIFT LEVER FROM INSIDE OF VEHICLE Remove the four screws and remove the shift lever boot retainer. Pull up the shift lever boot. Cover the shift lever cap with cloth. Then, pressing down on the shift
...shift lever in column is loose your problem with the gear selector is in the item 25 these are 2 plastic bushings that wear out and cause the gear selector feels loose, you should also check the item ...
...shift lever on the bottom of the steering column. On vehicles equipped with cable-operated shift systems, the indicated position of the transmission selector lever is transferred to the transmission ...
Question about 1998 Econoline
...shift lever inside the center console frame , or ? the plastic lever to shift solenoid located passenger side of shift lever's bottom maybe broken preventing the switch to be activated so the shift ...
Question about 2002 TrailBlazer
...shift lever out of PARK (P). To access the shift lock release lever, do the following: 1. Press on the sides of the boot around the shift lever to release the boot. 2. Lift up the boot on the shift ...
...shift lever out of PARK (P). To access the shift lock release lever, do the following: 1. Press on the sides of the boot around the shift lever to release the boot. 2. Lift up the boot on the shift ...
Question about 2002 TrailBlazer
...shift lever out of PARK (P). To access the shift lock release lever, do the following: 1. Press on the sides of the boot around the shift lever to release the boot. 2. Lift up the boot on the shift ...
Question about 2002 TrailBlazer
...shift lever in the Park position and loosen the pinch not on the shift control lever. Move the selector lever all the way forward on the transmission. Then insert the shift control cable into the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions