Questions & Answers for: sewing machine slipping

Ad

Question about MyLock 634D Mechanical Sewing Machine

1 Answer

...machine sewing it, use a hand slip stitch as seen here: http://www.hutchal.clara.net/curtains/sewguide.htm. You can find more info on these techniques at ...

Ad

Question about MyLock 634D Mechanical Sewing Machine

1 Answer

...sewing machine. I am I have a kenmore 385.19106 sewing machine. I am new to sewing with a machine. I began sewing yesterday and all seemed fine. Today, the threat from the bobbin continuously doubles ...

Ad

Question about 2732 Mechanical Sewing Machine

1 Answer

...gently closing the gap in the thread take up lever, I had the same problem in my mechanical sewing machine & that's what it took to fix it, the thread doesn't slip off any more when I'm

Question about Creative Spirti PLus SA2200 Mechanical Sewing Machine

1 Answer

...sewing machine simplicity The needle will go up and down if I crank the wheel by hand. But whenever you go to push on the power pedal, all you get is a slipping belt noise. Was working with a heavier ...

Question about Shark 9110 Sewing Machine

1 Answer

thread uptake lever slips the sewing machine probably needs to be checked to see why the take up lever is slipping.

Question about Inspiration 4205 Mechanical Sewing Machine

1 Answer

sewing machine to full sewing function again .. it sometimes works for a moment and then just makes a whirring sound and no parts will move although everything still responds when i turn the handle on

Question about Sewing Machine. Jem Gold Portable Sewing Machine 660

1 Answer

How can I get my Janome Jem Gold bobbin winder to work again? It slips--like the bobbin pin is not grabbing the bobbin. It used to work. Try putting machine oil in particular points. Otherwise find a ...

Question about Confidence 7469 Mechanical Sewing Machine

1 Answer

My singer 7469 lights are all blinking she won't sew Please help me my singer 7469 won't do anything all lights are blinking flashing lights, beeping sound are error signs its posiibly the ...

...Make sure you are using a brand new needle made for the type of fabric you are sewing. Could be that the belt is slipping on your machine. You may want to take it for a checkup. All About Needles

My thread slips out of the needle every time it starts to sew, if I stop the machine and pull a little bit of thread out then it does NOT slip and sews perfectly I'm using a TOYOTA ESP9000 embroidery ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6048 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...