...have a janome 32 sewing machine. everytime i try to sew lycra, the back of the garment does not sew - all the cotton balls up. can you tell me the settings the machine should be on for lycra
Question about XL-2230 Mechanical Sewing Machine
...sew lycra on a Brother XL-2230 machine. I need to do a zigzag stitch. Can you tell me what the tension should be on? I cannot get it to work. Thanks! You would be better off using a multi zig zag ...
Question about XL-2230 Mechanical Sewing Machine
...lycra fabric using a zig zag stitch. The machine is set correctly for zig zag, the needle moves back and forth but it wil sew 1 zig zag stitch and then a series of straight stitches then another zig ...
Question about MyLock 634D Mechanical Sewing Machine
...sew Lycra sports clothing Im not familiar with the huskylock but I use woolly thread on both loopers with good tension and less than a medium length on the needle stitch and using the differential ...
...sew lycra the stitches gather too much tension on thread Make sure you are using a zig-zag stitch (or a stretch stitch, if available) so the lycra will be able to stretch without popping the seams. ...
Question about MyLock 634D Mechanical Sewing Machine
...needle? Frequently, a bent, dull, or incorrect needle will cause skipped stitches. Also, for sewing knits (lycra), be sure to use a ball-point needle. Likewise, use the appropriate needle for ...
Question about MyLock 634D Mechanical Sewing Machine
...sew Lycra on my necchi 522? I'm using a stretch needle. It goes up and down, fabric advances, but does not pick up bobbin thread - so no stitches! Knit fabric sometimes plays a little havoc with ...
Question about MyLock 634D Mechanical Sewing Machine
...The left hand needle keeps missing stitches and can't work out why. I'm using 4 threads and sewing on lycra stretchey material. Have you tried it on something, not lycra, like plain cotton? ...
Question about MyLock 634D Mechanical Sewing Machine
I was sewing on a light lycra fabric with a universal needle, i later noticed something was off, i did all checks and realised the needle keeps hitting the shuttle. I dont know what to do. The timing ...
Question about MyLock 634D Mechanical Sewing Machine
...a Janome series 313 and I am trying to sew spandex (lycra) but the fabric gets pulled into the feed dogs. I am a novice sewer.
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions