Questions & Answers for: setting tension

Tension issue I am trying to set the correct tension and stich length so I can quilt using my new feed foot. I normally have a tension of about 4 or 3, and a length of 2. Quilting requires the ...

Tension settings for husquvana daisy What are the simple tension settings for straight stitch on cotton. Please! Your machine tension should be set between 3-5. If your stitch is too loose on the ...

...Tension Setting - The picture looks like a column of X's. See page 29 of the Owner's Manual. Thread tension Adjust top thread tension by touching or . The numbers in the window indicates the tension ...

...tension setting. Each machine is different though and with use, those settings may change. You should be able to start with all 4 tensions set in the middle and then, looking at how it stitches, you ...

...Tension setting is trial and error. To learn choose two color threads same weight and manufacture. placing one in bobbin other top tread. Set the lower tension to light. The lower tension has always ...

...tension setting than fine chiffon. To be successful with tension settings, one must become comfortable adjusting the upper tension. NOTE: Accurate tension is achieved when the upper thread and bobbin ...

...tension can be tricky. Be sure to mark with permanent marker the skrew setting on the bobbin case before making any adjustments. Make only 1/8th turn adjustment at a time as a small change can make a ...

tension screw setting with nail polish before making any adjustments. This makes it easy to reset it to the original setting. Understanding Thread Tension Threads Bobbin Tension How and Why Tension is

...tension setting for most fabrics, thread, and needles. However, that is also adjusted based on what you are sewing. Bobbin tension you should leave as is unless there are issues that the top tension ...

...tension dials. This is generally the setting for a basic overlock stitch. However, different tension settings is how different stitches are created. Be sure thread is in the tension docs properly, a ...