Questions & Answers for: set time acu rite

...set the correct time, it always shows about 5 mins fast, and have lost my instructions, ? help I think I solved the problem, take out the batteries and reinstall and then reset, seems to be doing ok ...

set the time on Acu-Rite model 13100 clock? How? How do reset time on model 13003 ?? It reads 12:15 and the Time is 11:27 Clark page [email protected] Go to:http://www.atomixtime.com/pgs/pdfs/13003%20THOR

...time display flashes. Then press "set-up" again, and again (for me it was 8 times), until you get to where the "C" is flashing you want to change to "F." Now, press "Min" on the far left once to ...

clock had a button on the back of it for DST/Time Zones. If your clock has this, it needs to be set to the correct time zone for your area. That would account for it being off 3 hours. Hope this helps

...flash. 2) I cannot set the Day of the Week, Month, or Day. Before attempting to set the time, let the outdoor transmitter sync with the indoor receiver. One that's done you can set the date and

I need instructions for my Model 00972 Acu-Rite instrument. flashes continuously the time and the outside timp i set the time and over night i loses about 3 hours

Time keeps changing on its own, going back 1 hr. to a different time zone. How do I remedy this? Thanks check to see if clock is set for daylight saving, also check that your correct time zone is set

...set time on my acurite00604RX Hold the Time button until the hour blinks.  When it does, use + or - to adjust. When correct, press Time again. This will cause the minute to blink - use the same ...

...set time on model 13003 how to set time date on acu rite model 13003 clock HelloGet into this link.  You can get all the details for your clock radio from ...

...set the time on your 00604 thermometer. Press and Hold the Time button until the Hour begins flashing. Release Time Press and Release the + or - buttons to adjust Press and Release Time and the ...