set lamp timer. press and hold the "enter" button on the TV, the press and hold the "menu" button on the zenith remote-- after several seconds of holding both buttons the option of re-setting the lamp
set lamp timer I just replaced the lamp in my projection tv and i dont know how to reset the timer Panasonic TY-LA1000 Projector Jerico, If you will go on dlp lamps .com I believe they answer that ...
Question about E44W46LCD 44" Rear Projection HDTV-Ready Television
...lamp timer. If the set did not come on before you changed the lamp then the lamp is not the problem. If it was working before you changed the lamp make sure the lamp is seated correctly also the lamp ...
set timer i replace lamp but how do i reset timer You did not post model number of TV so try below method to reset lamp timer. Turn TV ON, Press and hold Volume minus button on TV and press Split/ ...
Question about PT-43LC14 43" Rear Projection HDTV
...lamp TY-LA 1ooo How is the new age timer set??? Press and hold Volume down button on tv front and Split/Play button on remote for 6 seconds to reset lamp timer. TV will show you lamp timer reset ...
...lamp timer menu if the set is in service mode, but the user's manual doesn't tell how to get there (I don't have that info either - it's in the service manual, which may be available online from a ...
...timer. One of the remote units stopped working immediately and has never worked since. Both the remote controls work, but only 5 of the 6 remote units work. I test timers and 6-8% arrive defective. ...
Question about PT-40LC12 40" Rear Projection HDTV
...lamp timer, Use the Remote Commander to put the set into service mode to display the service menus. 1. TV must be in standby mode (Power off). 2. Press the following buttons on the Remote commander ...
...the bottom row of buttons has a multifunction button for split screen! I tried that and it worked. I had a message that said the lamp timer was set to zero. Done! Hope this helps someone out
...set? I changed the lamp but still get poor color quality. I replaced lamp with another new one. Got poor color quality and set was unresponsive to remote control or manual buttons on side panel. I ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions