...service type Port Forwarding. The router pre-defined services are listed there. 3. From the Service Name pull down list, select the service that needs to be hosted. 4. Enter the IP address of the ...
Question about WGR614 54Mbps Wireless Router (obwgr614_1)
...service type Port Forwarding. The router pre-defined services are listed there. 3. From the Service Name pull down list, select the service that needs to be hosted. 4. Enter the IP address of the ...
...service type Port Forwarding. The router pre-defined services are listed there. 3. From the Service Name pull down list, select the service that needs to be hosted. 4. Enter the IP address of the ...
...service type Port Forwarding. The router pre-defined services are listed there. 3. From the Service Name pull down list, select the service that needs to be hosted. 4. Enter the IP address of the ...
...is how it will be done:- Service name:-abc Service type:-tcp Starting port:-80 Ending Port:-80 Server Ip Address:-192.168.1.15 After forwarding all the port numbers go for the connection test on
...as per Vivitek Service"The USB port is not in input port. This is used for service only. Please use another input port such as RGB input. Regards, Vivitek Customer Service"Hope this
Question about WNR2000 Wireless Router
...Service. 1. Select Port Forwarding/Port Triggering under Advanced in the main menu. 2. Click Add Service (see Figure 5-1 on page 5-7).The Ports-Custom Services screen displays. 3. In the Service Name ...
Question about WNR2000 Wireless Router
...service port for each Huawei xDSL port, and then add the created two service ports to the established standard VLAN. NOTE: The service ports can be added to the standard VLAN only when the attribute ...
Question about WNR2000 Wireless Router
...service port configuration, namely, the PVC configuration, of an xDSL port. To change the service VLAN, run the undo service-port command to delete the service ports (PVCs), and then configure a new ...
Question about WNR2000 Wireless Router
...service port of the Huawei MA5616 be activated or deactivated? In version V800R306, the service port cannot be activated or deactivated, but only the user port can be activated and deactivated. For ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions