Questions & Answers for: Volkswagen Golf sequences

2001 vw polo im having problems with my vw polo ,running for approx 3-4 miles then no throttle,emitions and epc light on ,changed exhaust ,and lambda sensor ,still no joy Dear Customer, 1 check your ...

sequence for spark plug leads on a vw polo 1.4 1996 on the distributer cap which is the plug lead for number 1 spark plug and which is number 1 spark plug, also what is the firing sequence. thanks ...

what is the firing sequence of my polo mk2 1994 engine 1043cc i have prblems with starting if i park whith pass. wheels roadside when parked on pavements is it a fuel line prob. 1432

sequence for spark plugs i just changed the distributer cap on my car and i need to know the sequence the spark plugs go back in What size engine is it?

spark plug sequence i just changed the distributer cap on my 1.4 vw golf and i need to know the sequence the spark plugs go back in this is a 1.8L but the firing order is the same for a 1.4, just ...

...belt has slipped. Remove and replace. Hi Andre, Sounds like timing is off or the plug wires are sequences wrong. Has anything recently been done to the vehicle? (e.g. tune up, timing, plugs).

I need to know the piston sequence and rotary cap sequence and firing order for a 86' volks. golf 1.3.4.2.

torque setting for golf1 95mdl head bolts CYLINDER HEAD TIGHTENING TORQUE [1] : 1st sequence: 40 Nm (30 ft lb) 2nd sequence: 60 Nm (43 ft lb) Final sequence: plus 1/2 turn (180°) torque sequence ...

looking for torque settings and sequence for head bolts on a 1996 2 litre golf 45lbs then stage to you rotate another 90 degrees then another 90 degrees as stage 3

engine doesn't tirn after torgue, the bearings and bigets has been changed to 010 after engineered. torgue settings I used are 65 for bigets and 35 for pistols Hi Mike, I have not checked the torque ...