programming remote to open doors I bought a 2006 rx400h second hand and the dealer only had one key, not the remote unfortunately. I found a locksmith who wouldcut spare keys and could program the ...
what are the torgue specification for replacing the intake manifold.... after replacing the gasket... what should the torque be on the bolts and nuts. 20 ft pound, tighten fasteners in sequence ...
timing belt sequence on the gears Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
1993 LEXUS ES300 TIMING BELT SEQUENCE I REPLACED THE WATER PUMP AND DONT REMEMBER THE SEQUENCE FOR TIMING BELT HOW CAN I FIND THIS INFORMATION OR CAN U PLEASE HELP ME...THANX There should be a sticker
Im replacing the head gasket on my 94 GS300 and need to know the torque specs for the head bolts step # 1 tighten 25 ft lbs, step# 2 tighten 90% step # 3 tighten another 90% note do in sequence start ...
need torque for head cylinder bolt and sequence call most any auto parts they generally have this information..
The power windows are not working on 3 doors. What could be the problem? Just had a dead battery and jumped it off. Most likely the RX lost the ECU program/ configuration. Need to reset the config. It
tightening sequence intake manifold There is no sequence on file, what i do is start in the middle and work your way out, , the tightening torque is 13 ft lbs, and the top half is hand tight, you can ...
Question about 1999 Gs 400
what is the torque spec for cylinder head on 96 lexus sc300 3.0l There are 3 steps(1) first them to 29 ft.lbs.in sequence(2) torque to 90 degrees in sequence (3) torque to 90 degrees in sequence again
Question about 2004 ES 330
2004 Lexus es330 intake manifold torque sequence.need to reinstall intake manifold after replacing the knock sensors. Need torque in ft. lbs. and bolt sequence. Thank you! Fix your car right away, by ...
Usually answered in minutes!
531 Questions
449 Questions
431 Questions
363 Questions
362 Questions