...seperate the two for your new parts. Place the Lower Agitator on the floor and stand on the flat lip. Then Pull up to separate the Upper Agitator (mover) from the Lower Agitator. As far as your parts ...
...seperate the upper section from the lower section. There are 4 small teardrop shaped pieces that are the agitator dogs. They have either come apart over time or at least the teeth have worn off them. ...
...upper and lower halves should be joined as such. There is a 7/16 bolt in the middle that should be loosened to help removal. If not get and old belt and place it under the agitator and carefully pull ...
Question about Ultimate Care II LSQ9549L Top Load Washer
...seperate it, then you will see the dogs I speak of on a retainer. You can get replacements at any appliance parts store, and shouldn't be too costly. Replace them, slide the retainer into the upper ...
Question about Ultimate Care II LSQ9549L Top Load Washer
...seperate the upper and lower agitator i have a lsq9549lwo. i tried standing on the lower and pulling the upper but it does not work. Some of the agitators were "welded" at the 4 tabs holding the hub ...
...upper half of the agitator and catch the notched inner section of the agitator to make the top action work like a corkscrew, slipping one way and driving the other as the lower half goes back and ...
Question about Ultimate Care II LSQ9564J Top Load Washer
...upper part of the agitator supposed to spin with the lower part? It spins freely when I turn it, but doesn't spin when spin cycle is activated during a cycle. You have bad agitator dogs . Easily ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions