Questions & Answers for: separate pool pump motor

Ad

pool pump to replace seal? First, separate motor and pump. Remove back cover of motor. Drive shaft of motor either has a slot on end for a large screwdriver or a flat on it for a wrench.(usually 7/16)

Ad

Question about MAGNUM FORCE POOL PUMP - TWO SPEED 2 HP 115/230V

1 Answer

How do I separate a Jacuzzi motor from the pump? I removed the round locking ring but I can't pull motor away from the pump. It's just stuck. Pull hard and carefully.

Ad

Question about 1.5 Hp Northstar High Performance Pump

1 Answer

...separate pump from motor Motor went bad on my Hayward pool pump... bought a new motor, so how do you get the pump off the motor? Remove the back cover from the motor, lock the shaft in place, thread ...

Question about A O Smith Motors Century 1hp 115v Thru - Bolt Lomart Motor - Bv90

1 Answer

...pool pump impellor from motor shaft Separate pump and motor. Remove diffuser. Remove back cover from motor. Motor shaft has either a slot for a screwdriver or a flat area for a wrench. Hold shaft and ...

Question about 2HP Pool Pump Motor A O Smith Electric Pool Motor for 56J Frame

2 Answers

...separate from the pump housing. there are 4 to 6 bolts around the joint between the motor and the pump. You probably want to remove the pump and motor from the system and get it to a more comfortable ...

Question about 1 hp WhisperFlo InGround Pool Pump WFE24 ()

1 Answer

...separate pump from motor take screws off around housing that separates motor from wet end remove diffuser then remove screw from impeller backwards thread and hold back shaft of motor after removing ...

Question about Pool Pump Motor Hayward Swimming Pool Pump Full Rated Motor / Cen

1 Answer

...separate the motor from the pump to access the impeller. Some styles of motors have a screw that is reverse threaded holding the impeller in place, if it has one , remove the screw. Once you have ...

Question about Pool Pump Motor Hayward Swimming Pool Pump Full Rated Motor / Cen

1 Answer

...pool pump motor but it does not want to separate from the impeller. What should I do to complete the removal? I did it about 10 yrs ago with a different motor, but this one was installed by a pool ...

Question about Pool Pump Motor Hayward Swimming Pool Pump Full Rated Motor / Cen

1 Answer

...separate wet end of pump and motor then remove screw if one on impeller sometimes they are backwards threads take screw out then unscrew impeller while holding shaft of motor that should be a regular ...

Question about 1.5hp Pool Pump Motor Motor A O Smith Electric Pool Motor for 56j Frame Motors Ust1152

1 Answer

...pool motor aol 1-1/2 hp Dismantle to Components It depends which pump you have, on hayward super II you shut off the breaker, remove the rear motor cover, disconnect the electrical wires, then remove ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Bill Jordan

Level 2 Expert

375 Answers

john h

Level 3 Expert

22486 Answers

David Spradling
David Spradling

Level 3 Expert

10764 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...