Questions & Answers for: Ford Expedition selector

...to shift transmission gears or correctly determine the transmission gear position using your gear selector indicator.this condition could lead to unintended vehicle movement in direction other than ...

...it this morning and after I moved the transmission from park to drive, I accidently moved the selector from 2 high to 4X4 low and now it will not change back. The selector switch moves but the ...

vent flap is operating on the hot side even when set on a/c. how can I correct this problem? check the vacuum lines for the hot/cold selector.

...neutral etc. Do you have the extra shift lever on the floor or the "shift on the fly" electric selector? My 1999 only needs to be put in Neutral(with brake pedal pressed) for the Low range and ...

...range will not disengage. You need to put the vehicle in Neutral, foot on brake, and then turn the Selector to the other 2 positions that you want. If you have done this and the vehicle does not ...

...range, you need a foot on the Brake and simultaneously need the gearshift in Neutral and the 4x4 selector in Low. That is 3 things to make the low range happen. Even if your foot was on the Brake ...

no 4x4 when turning selector switch to 4x4 position(any position) no 4 wheel drive. It doesn't matter which position the selector switch is in. Resistance readings good in all 4 positions of switch. ...

...actuator is not serviced individually. If replacement is required, install a new floor shift selector lever assembly. For additional information, refer to Selector Lever - Floor Shift in this ...

...information. First there is no off setting on the fan switch for those, you have to turn the mode selector switch on the right to off in order for the blower to stop. If you have the mode selector ...

...blower. The ground side of the blower circuit will always have a ground path through the function selector switch assembly. Power is supplied to the blower motor using a blower relay. Relays have a