Questions & Answers for: Mercury selector

...to this light is this the shift position indicator like drive, park reverse, neutral? Transmission Selector Lever Removal Raise and support the vehicle. For additional information, refer to Section ...

... 7 1/2 amp check enigne light not related. ---------------------------------------------------- The selector lever lock can be moved mechanically out of position ?P" when for example the battery is ...

I have a 1994 Merc Grand Marquis and the gear selector does not go into park and remains in neutral, the selector does not line up with the corresponding gears on the dash guage. Is there a cable or ...

a/c blows thru defroster Sounds like the switch behind the selector is eithe broken, or stuck in that posiition (or internally) is not moving. I suggest pulling the heater/ac selector unit out and ...

...the 5/8 inch heater hose to the firewall and look at the heat control valve position when the selector on the dash is toward cold. Then I would move the selector switch to hot and look at the ...

where is the selector lever lock for gearshift on 1998 mercury mystique? I am going to see if I can somehow get selector to go to neutral so I can drive it. I have a 99. On my car, there is a small ...

what do codes p0707 and code p0708? error codes from computer 1. Place the selector lever in the "N" (Neutral) position. 2. Loosen the manual control lever lock nut to separate the cable and lever. 3.

...a variable length plunger that gets its signal from the dash knob. When the lightbulb in the dash selector knob burns out; the voltage changes at the solenoid plunger. The plunger then operates ...

...The second possibility is a damper is not working. With the engine off and the switch on, put the selector to defrost while listening closely. You should hear dampers opening and closing. If you

... the gear hand have slide down. What can I do? Pulling it back nothing, this guy told me about gear selector can't find one. If you are real careful you could try Gorilla glue to hold the selector in ...