Questions & Answers for: seized door car locks

...unit for front right door broken found a spare 1 and replaced it.. can't get the door lock working.. Where does the door lock fit onto the swivelling arm for the door handle? lock may be

Ad

...door panel to replace the actuators. I have done this twice and both times have only gotten about three weeks before a lock up seizure. It is unsafe for my kids as the key fob, the key or manually ...

Ad

...door locks were all seized, I even tried the 200sx as its the same car but a 2 door, same problem. luckily i found out that the 94 nissan altimas have the same door locks so I dismantled the inside ...

Question about 1996 Sentra

1 Answer

The central locking makes a sound like it wants to lock when the button is pressed, but nothing happens. Everything that normally happens when the button is pressed happens except for the 2 front ...

...or back passenger door? More than likely the lock has seized and you'll have to take the interior door panel off in order to access the mechanics of the door lock to see what is jammed. Good

Question about 2000 Impala

1 Answer

...door lock will not open with key or power lock all other doors work. I need your advice can it be a fuse? if it was a fuse none of the doors would work.it sounds more like the electric lock motor is ...

...DOOR PANELS IT SEEMS TO BE SEIZED WHAT CAN I DO TO OPEN THE DOORS TO BE ABLE TO REPAIR To start, you need to spray something on the seized up parts, WD 40, penetrating oil, ect...and let it sit ...

...car and locked the door, you could not unlock it. If you were outside and tried to use the keyfob to unlock the doors, it would not unlock. If you tried to use the key, it felt like something was ...

...Sounds as if the drivers door lock actuator motor is seized/jammed in one direction not enabling the door to unlock. The door will most likely need panel disassembly for ...

Question about 2000 Montero Sport

1 Answer

...door lock cylinders may seize due to lack of use if using the key fob. You can use WD-40 and insert the straw into the lock and spray liberaly. Use the key in a sawing motion while applying turning ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...