Questions & Answers for: sebring stalls

Question about 1995 Sebring

1 Answer

chrysler sebring 95 it seems to be choking its self out to a stall try replacing the EGR valve the last 4 ve fixed for stalling that has been the problem hope this helps lol

Ad

Question about 2007 Sebring Sedan

1 Answer

...stalls when cold, only generally first start of each day. My 2007 Sebring with the 2.4L World Engine had a similar problem when shifted from reverse to drive when engine was stone cold. The engine ...

Ad

...stalls while driving my 2002 sebring convertible. (Engine light and airbag light have been on for 2 years, also found a hose connected to tank, i think it was the egr valve, clamped closed. dont know ...

Question about 2004 Sebring

1 Answer

sebring stalls when put into gear Looks like Torque Converter Lockup solenoid. Its located on your transmission and it might be the reason that the car stalls. But can you explain what exactly happens

...sebring stalls and will not start back up The searing stalls and will not start right.This can be cause by low fuel pressure problem or bad timing belt or problem with ECM(the cars computer) it self. ...

1998 sebring convertible stalled and wont restart, felt like out of gas but has full tank was driving down the road and the car sputtered like it was out of gas, and stalled, it wont start again. Cam ...

I have a 2008 chrysler sebring that will stall mainly when it's cold and in morning.Ok when it's running and warming up. Mechanic said need a camshaft sensor after he ran code. Usually will st

...sebring stalls and overheats, check engine light in on, code 0601. could this actually cause my car to overheat and stall? Have the fault codes read. Replace faulty items. Use only genuine items as ...

...Sebring 2.4L 4cyl Randomly stalls when coming to a stop, when starting, and when backing. Feels like its going to stall if I push pedal down too fast when starting to go. If I start out slowly it ...

...sebring stalls and will not crank for hours it stalls while driveing or setting still If it usually starts when cold, but when fails hot will not start until totally cold, suspect bad coil, ignition ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...