Questions & Answers for: Dodge Grand Caravan seat motor

...to reach motor bolts. To remove the panel completely. You must remove all screws & the seatbealt bolts for the 2nd & 3rd ...

Ad

Question about 2004 Grand Caravan

2 Answers

...good check for power at seat motor.if yes replace seat motor.if no check wires at switch.if wires is not loose or broken seat motor switch could be bad. power seat wont move backwards 02 dodge ...

Ad

Question about 2002 Grand Caravan

1 Answer

...blows high only It is on the rear passenger side, all the way in the back. You have to take out the seats and take off the trim panes to get to it. You need to pull out the motor and the resistor is ...

Question about 2005 Grand Caravan

1 Answer

...Motor? Remove Negitive battery cable. Remove 2nd row seat on the side to be replaced or remove bench. You have to do this from the inside of the van with the door closed. Remove the upper trim aroud ...

...motor housing and seat the wiring grommet in the hole of the blower motor housing. Reconnect the blower motor electrical connector. Install the A/C-heater blower motor cover. Install the glove box ...

...seat and replace the motor? Do you have instructions to remove the sesat Honestly, If you are considering this as an option, you probably have all the tools, a simple set of sockets will get the seat ...

...back and forth When I hit the lever to recline I can feel the motor engage but the seat will not recline. Someone will have to remove the seat and check the motor and linkage to see what is

...motor) 3 times then from drivers seat only clip and lock seat belt then unlock 3 times and leave it in wait 20 seconds and see if it worked, ,you may have to repeat this more than once, or try it the ...

...whether the switch is faulty or the motor. If bypassing the switch makes the seat operate correctly then the switch is the culprit. If not then it's the motor 9 out of 10 times it's the

...caravan driver seat won't move up or down It moves front and back and it reclines. Whenever I press the button to move up or down ,I just hear the motor humming slightly. check gearing--or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...