Questions & Answers for: Buick Riviera seat motor

...seat, is there a relay l can replace? or does the blower motor module control need replacing ? l understand from looking at the answers on this page that the blower motor is inside the car under the ...

Ad

...and back is working. Just can't come back forward. thanks in advance yes it the same motor, the problem u will find is the seat control switch, it is the most common failure in any power seat

Ad

Question about 1995 Riviera

3 Answers

...SEAT MOTOR.IF NO REPLACE SWITCH.IF YES REPLACE POWER SEAT MOTOR.FIRST DO A HOT WIRE TEST. ON SEAT MOTOR USING A JUMPER WIRE USING BATTERY TO MAKE SURE YOU DONT HAVE WIRING PROBLEMS. Where would the ...

Power seat will only go forward not back, also will only tilt back, not down/forward. The motors are under the seat.If you have a test light then check to see if your getting power when you work the ...

not blown. what could it be? the seat motor seems to be stuck or the switch is bad.Try to get under the seat from the rear and put 12volts to the motor plug in in the right direction to get it to move

Question about 1995 Riviera

1 Answer

motor. I would try seeing if the ground came loose. Same thing happened to my passeneger window. I reconnected the ground and it works like it never quit. Try the wiring under the passenger and driver

...fusae under back seat labeled HVAC-BLO-MOT CAN YOU HELP/?? Your blower motor relay is probably stuck on. Sometimes you can tap on them and it will turn off but you will have to replace that

...seat motor or is it something else, passenger side works fine You have a damaged drive gear in the seat, the parts are no longer sold for this ol of a model so your best bet is to try and locate a ...

...seat i have pulled the blower motor. by passed and motor fine no power to fuse left side of dash is there a rel 1998 buick riviera blower motor not working Not sure hat rely you are checking but the ...

...seat clicks does not move forward back up down but moved forward now nothing the motors are not that reliable you may have blowen a fuse, or loose wires, or some thing is jamming motor or brushes in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...