Questions & Answers for: GMC seat motor

Also the switch could be bad. Unfortunatley being that its power there is no way to manually move the seat back without the motor turning or removing the seat and spinning the motor sprocket by hand..

seat motor stays on when you turn off the driver seat motor stays on when you turn off the car and will kill the battery if you dont push the seat lever by hand May have a bad door switch or bad relay

3 motors mounted under the seat to move the postion of the seat, the cable for that motor maybe broken. Also check that the pivot points move freely and that there is nothing jammed in the seat tracks

...seat adjuster motor is controlled by the memory seat module through 2 motor control circuits. While the seat adjuster motors are in an inactive state the motor control circuits are closed to ground ...

...this is to remove the bolts holding the seat frame to the floor, then using the motor move the seat as far back as it will go, then tip the seat forward and inspect the motor and gears

seat or motor right now so I was just wondering if there is a way to troubleshoot it so i can drive it without pillows behind me? we have a long drive ahead of us so I don't want to drive with

...Motor • Seat Front Vertical Motor • Seat Rear Vertical Motor • Seat Recliner Motor • Driver Seat Module • Memory Seat Switch It's not the module , probably sensor supplying bad info to the module. ...

...seat motor at the coupling underneath the seat. It may be underneath the carpet. Test the wire plug, with the ignition key on and the seat electric seat position lever/button pushed, and see if there ...

...Motor • Seat Front Vertical Motor • Seat Rear Vertical Motor • Seat Recliner Motor • Driver Seat Module • Memory Seat Switch Memory Seat System Description Battery voltage is supplied to the driver ...

...seat adjuster motor is controlled by the power seat switch through 2 motor control circuits. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by ...