Questions & Answers for: seat adjuster Health & Beauty

seat adjustment We just bought a 1990 olds cutlass cierra with no manual. The driver's seat has an electric switch to raise and lower the seat back, but we cannot figure out how to adjust the ...

seat adjuster handle located on the front seat is pulled up, the seat adjusters unlock, permitting travel of the seat. When the seat is in the desired position and the seat adjuster handle is released

the seat adjustment for my drivers seat has either broke or has come apart. It's the adjustment for leaning forward and back. Can it be fixed such as taking apart the seat to get to the adjustment? ...

...seat adjuster 2001 VW Beetle. The driver's front seat adjuster won't catch, so the seat slides forward and back. I'm assuming you have manual adjustment seats. There is a spring underneath the seat ...

How do I adjust the back of the seat? I am short, the seat was adjusted for a much taller person. We got the seat bottom moved forward but have been unable to adjust the seat back so that it sit up ...

how do you adjust the seat Hi there Vriddick To adjust the seat for height, there is a locking bolt on the seat post, below the seat. Loosen this and the seat should drop down the hole. Lift it up to ...

...seat adjuster motors are controlled by the driver seat module through the adjuster motor control circuits. In an inactive state both of the motor control circuits are grounded within the driver seat ...

...seat back adjuster handle cracked - won't adjust seat + manual seat adjuster won't adjust. Something undone under seat? call some yards, find a similar or same truck. go to yard and check out those ...

...seat adjuster switches are in an inactive state the switch contacts are closed to the power seat switch ground circuit. When a power seat switch is pressed to an active state the switch contact is ...

...seat adjuster switches are in an inactive state the switch contacts are closed to the power seat switch ground circuit. When a power seat switch is pressed to an active state the switch contact is ...