Questions & Answers for: Samsung LN screen is white

...verticle white line down the middle the tv has a 3" white line down the middle of the screen Sounds like your LCD panel is failinf and will need to be replaced it is going to be costly around ...

...screen is white. I can not access the menu on the TV to see if it is just some kind of incorrect setting. your T-con board has failed you need to have a tech take a look because there are so many ...

...screen is white.power is on, simply no picture, white screen Hi: This could be cause by one to two areas of the unit, first the T-CON board may be bad and second the main system board has failed. The ...

...screen is slightly white-washed. The right half of the screen is perfect and everthing else on the tv works. Any idea what might be the cause? Call Samsung (1-800-726-7864)about the problem. They are ...

...screen. Sometimes the white line is thicker on the left side of the screen. Sometimes after the white line appears at the top, the screen will go multi color and sometimes it will just go black. To ...

...screen white spots First is to check all inputs tuner and rear---white spots suggest whatever is doing the digital processing in the set is the cause----main board most likely with power supply ...

...white screen. I spoke with someone from Samsung that directed me to I have a 46 inch LCD LN46A630. It was working fine and suddenly the screen when white. You can faintly see a picture beneath the ...

Screen went all white I was using my television as normal, when all of a sudden the screen went all white, and there is no picture. I tried unplugging it and plugging it back in, but the screen is ...

...white snow going down the screen After tv warms up. The picture gets white snowy dots running down the screen and gets worse over time. Tuner fault. Contact any service technician. If you wish to get ...

...white screen on a Samsung television? The picture on my in-law's tv recently became solarized. Upon consultation with Google, it appeared that the t-con board needed to be replaced. Had the board ...