Questions & Answers for: Dell Inspiron screen too loose

...screen connections, one may have worked loose. Screens will go out without warning, so, if the connections are good and it works with the external it may be the screen. If the external doesn't work ...

...screen loose, you will see he four screws holding the screen at the sides. Tilt the screen forward and you will see the connection on the back. Make sure this connection is seated properly, you may ...

...loose screen connection or a failing screen. Start by checking the screen connections. It's generally the connection on the back of the screen, but go ahead and check the screen to inverter, and ...

...loose screen connection How do I get into the back of my laptop screen? If you read the other post I sent earlier, sorry about the stupid comment, I was a bit irritated with the inappropriate rating. ...

screen is loose the lap top screen (top cover) is loose , it will not stay in one position Yes, the bushings tend to wear out over tme and use. Options are either replacement of the lid ($$) or laptop

...screen flickering..when i press it hard it stops but as i remove my thumb display flickers and its almost tough to see anything First of all, try to reconnect LCD cable. If problem still be, you will ...

...screen, might be a pinched wire,or loose connection to the mobo (motherboard) I would test the replacement screen and the inverter to make sure they are good. In most cases but not all, if the ...

...you heard of this? Hello, This could be a screen cable problem but it is normally a faulty screen even though it may look like a loose connection. Get a technician to check it for you. All the

...screen is dark on one side and also the sreen part is loose on the hinges? Damaged inverter, or possibly loose contact / wire. If you feel confident, obtain a dismantling guide and remove the screen ...

Loose Screen on Dell Inspron 1525 If the hinges are loose, it is not possible to tighten them, the hinges need to be replaced. For details on replacing hinges, please click on these WEB sites :- ...