Questions & Answers for: ASUS Eee screen too loose

when turned on, many zeros appear, as in the whole screen. when you turn it off, then on again, screen is black. please help. Your RAM needs to be replaced ... bcoz this occur when the RAM is ...

...indicates that the video data cable is not connected. Either the cable is coming loose when you open the screen or there is a break in the cable. Someone will have to open the case to find out

Screen is dark. Power light on but will not boot. memory cards need to be reseated they have been knocked loose and the motherboard uses shared memory for video and with memory cards loose no video ...

...I adjust it? Loose connection from screen to motherboard, you will need to make sure the edge connectors are pushed in fully. Check manual for instructions, or google your model for info/youtube ...

loose. One thing that you must do, is that if you can get the screen working, even once, save all your important files and pictures onto an external device, such as a USB stick. well if you wiggle it

...from regular usage or the connection is loose. the white screen is lit but no data is visible, black screen, ffl tube or inverter is bad. check connections first, always check the simple things

also! check the video cable from the motherboard to the screen, on rare occasions it comes loose. If both screens show the same symptoms, it is the video graphics card that is part of the motherboard

...screen works--looks like a loose connection somewhere. If your laptop appears to boot up and the hard disk LED flashes, then the problem is probably a back light fault. This can be a faulty inverter ...

...loose yellow screen on startup Color on screen is to yellow. how do i get to the inverter? Do I just pry the screen off? The inverter is located at the bottom of the screen between the hinges and ...

...screen goes blank This is most probaby because of a loose display cable connection .As the cable runs through the hinge slot to the mainboard of the laptop, open the laptop full and try pressing ...