Questions & Answers for: Gateway screen too loose

...the top half of screen about half an inch apart. Red vertical line down the middle left side of the screen. Inverter board is bad or video cable loose either behind LCD panel or near video

...loose connection generally causes the screen to go out entirely, rare but occasionally it can cause just the backlight to go. If the connections are good, then you will need to take it in to have the ...

screen has a loose connection. Check those first. A lot of screens also have a ribbon connecting the top and a side board in the lcd screen itself that may have a loose contact. usually this ribbon is

...screen which pixels to light up, and which color. You may have a loose connection where ribbon cables connect to the board or the LCD panel, but you'd have to take it apart to see. Likely the monitor ...

...screen would reappear--- It sounds like a loose wire. If you are out of waurantee open it up and see if there is a wire that has come loose. Only it you feel comfortable, doing this. First check the ...

laptop screen will not come on i replaced the lcd and the backlight works great but still no picture on screen. plug in extrenal screen and i have a beautiful picture can you point me in the right ...

...loose connction from the MCU to the Screen. MCU ( main control board ). Also check the hinges. They sometimes crack. Replace them in case of hinge problem. Thank you. What was fixed? Is the backlight ...

...screen is really loose ,may have something to do with it. but can't figur out how to take it apart? Hook a spare monitor to the video output usually on the back, if picture is okay! the ...

...screen is loose on the left side the charger also plugs in on the left side, whenever i plug my charger in, the power light begins to blink when my screen is at a certain angle, is there a way to fix ...

is sporatic. then when you wiggle the screen connection to the keyboard, the computer screen comes back. what do we do? You most likely have a loose video connects. Try re-seating the video connectors