Questions & Answers for: scanner jams

brother 2820 Says clear scanner jam and press stop Gentelmen, I have the problem with my Brother IntelliFax-2820. Everething looks clean, but I have an error message:Document jam Clear the scanner jam

...to RATE ME (FIXYA) for my help.......... Check the sensors inside the ADF. They look like little fingers, one is probably broken off. That scanner only detects paper jams with mechanical

Jams If your scanner stops scanning due to a paper jam in the Automatic Document Feeder, a warning dialog box opens after a few moments. To clear a paper jam: 1. Press the ADF cover release on the top

...Feeder), follow the steps below: Close the scanning application (such as PaperPort) Turn off the scanner and the computer If you have a combination ADF with a Flatbed scanner, unplug the ADF cable ...

Scanner will not load from top. Scanner will not load from top feeder. Error says paper jam but no paper is jammed into the feeder. the rollers may be broken, this would give the appearance of the ...

...has been going good and now when I scan one sheet of papper it the paper comes out fully the scanner keeps going and then say remove paper jam. There is no paper jam. I have shut it off and ...

JAM P007 The scanner has been giving this error report and refuses to carry on JAM P007. when we open the scanner there is nothing stuck but it keeps saying that there is a jam. it also freezes the ...

open the printer and check the paper path for possible jams. then open the scanner lid and make sure the scanner light bar is in the home position at the end of the scanner deck and not stuck mid path

...FINE BUT THEN ERROR MESSAGE OF PAPER JAM SHOWS UP. THERE IS NO JAM, CLEANED ADF AND ALL INSIDE OF SCANNER. STILL SHOWING PAPER JAM check the ...

scanner unit. 3, If the paper jam error still occurs, look for paper jams in the input tray area and remove them. For more printer related queries get in touch with our experts by just giving a call @