...scanner unit until it is completely closed. If the error message reappears, replace the black print cartridge with a new print cartridge. If it does not repeat steps 1-3 and then go to step 7. ...
...scanner unit until it is completely closed. 6. If the error message reappears, replace the black print cartridge with a new print cartridge. If it does not repeat steps 1-3 and then go to step 7. 7. ...
...scanner. this error can be caused by either the engine board or the scanner % wise 40%engine board 60% scanner ive done 120 repairs on lexmark laser for the last 7 years trust me one of these is the ...
...scanner unit until it is completely closed. If the error message reappears, replace the black print cartridge with a new print cartridge. If it does not repeat steps 1-3 and then go to step 7. ...
Question about X2470 All-In-One InkJet Printer
error: "failed to initialize paper source." The scanner needs no paper, so why the error. Did you allign the scanner? Print a test paper and then put the load the paper into scanner. Choose to allign
PRINT HEAD ERROR there are several different printhead errors 931 933 scanner motor died scanners bad. 932 934 935 are loose lock errors these can be caused by either the scanner or the engine board
...scanner unit until it is completely closed. If the error message reappears, replace the black print cartridge with a new print cartridge. If it does not repeat steps 1-3 and then go to step 7. ...
...error; Scanner error; Scan error; Cannot scan; Will not scan Solution--Overview An 843.01 error is generally caused by the Bottom ADF Cable on the scanner being loose or unplugged. Did the error ...
...error is a scanner lost lock error and can be caused by the scanner or the logic board. if this error comes up immediately on power up the scanner motor is not initializing by percentages of failure ...
the scanner unit and error its present on display... thank you 935 error indicates that scanner motor cannot reach proper speed. Likely the scanner motor is bad but it can also be the controller board
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions
