...for these remotes. Can some please help me out. thanks Unfortunately they have to be programmed through GM's Scan tool called a Tech 2. it is about $30-40 to have it programmed at your
...scan tool must stay connected until all of the transmitters are programmed. Invalidate All This procedure will erase all keyless entry transmitters from memory. Install a scan tool. Turn ON the ...
...More advanced troubleshooting steps include: Using an advanced scan tool, perform an EVAP leak test Verify operation of the EVAP purge solenoid / valve Perform a smoke test to see where the leak ...
...scan tool must stay connected until all of the transmitters are programmed. Install a scan tool. Turn ON the ignition with the engine OFF. With the scan tool, select Body. Select Remote Control Door ...
scan tool has the ability to reset all learned values back to zero. A new ECM will also have values set to zero. The idle may be unstable or a DTC may set if the learned values do not match the actual
...scan tool to verify there are no brake pedal position sensor and/or transmission internal mode switch (IMS) DTCs set that could cause the BCM not to provide battery voltage to the A/T shift lock ...
Question about 2009 Aura
...scan tool to do it . Steering Position Sensor Calibration Install the scan tool. Turn ON the ignition, with the engine OFF. Center the steering wheel. With the scan tool select Special Functions. ...
Usually answered in minutes!
247 Questions
151 Questions
120 Questions
27 Questions
12 Questions
