Questions & Answers for: Dodge scan tool

...Scan Tool To Tell ABS Computer To Bleed Brakes In order to get air out of the ABS modulator in my 2000 Dodge Stratus, the factory manual says: ''Using a scan tool, select ABS, MISC, BLEED and then ...

scan tool connector. It is located in the engine compartment against the fire wall. It links the engine controller to the Diagnostic Readout Box (DRBII) scan tool or the Mopar Diagnostic System (MDS),

...fo 1998 dodge durango? need to program to remotes To program your vehicle's key fob you will need a scan tool. Select PROGRAM RKE on the scan tool and follow the instructions on the scan tool

...maintenance required light on a 1999 dodge ram 3500 with 5.9 heavy duty gas engine. you need a scan tool to clear this not a code reader a full dealer level scan tool like the snap on scanner or ...

...Not sure what that code is? Some scan tool codes don't correspond with the factory codes. Do you have a manual for the scan tool? it should tell you what it is, otherwise it doesn't mean ...

scan tool will not connect to PCM, car has no spark, engine rolls over but wont start Does your 'service engine soon' (sometimes a check engine) light stay on if you turn the key to ...

...a scan tool. Some aftermarket scan tools for OBD1 systems have this feature, but not all. OBD2 scan tools are used on 1996 and newer vehicles. Most people either cover up the light or remove the

scan tool says front drivers side wheel speed sensor bad, replaced it now ABS/brake light still comes on and scan tool says 11 ECU internal circuit failure. HELP!!!!! You need someone with a Pro Grade

...scan tools to be sure the tool supports CAN_BUS. or tool is dead. POST A PROBLEM REAL, OR ALL SYMPTOMS GOOD AND BAD RTM https://eautorepair.net/Marketing/Default.asp The PCM for a 2005 Dodge Dakota ...

...scan tool! I've got a 2008 dodge avenger, my check engine light is on however when using a scan tool to reset it , it won't reset however upon rescanning it is telling me that their are no codes set ...