Questions & Answers for: sc101

error code Sc101 I have a lanier Copier 5265 And every time i start it the code SCqo1 pop up and it can't make a copy. What are the possible problems... See if the exposre lamp lights up. SC101 can be

ERROR CODE SC101 RICOH AFICIO 1013 CODE SC101 I WAS SENDING FAX AND HAD A POWER OUTAGE. WHEN POWER CAME BACK ON, THE MACHINE SHOWED ERROR CODE SC101 FUNCTIONAL PROBLEM AND RECOMMENDS SWITCHING OFF ...

i have one copiar machin 5455 my problam is stating machin showing error sc101 . Sc101 is a scanner home sensor error. Try removing the exposure glass, and clean the WHITE STRIP on the underside of ...

error SC101 on copier I replaced the glass on my Lanier 5622 copier now getting error SC101. Can I rest that No, you can't reset. You'll need a tech. Here's what the manual says: Symptom (SC101) - ...

This message appears when I turn on the copier ? Ricoh aficio 340 ? Functional problems SC101-00 what this message means Hello sir; SC101 means " exposure lamp out" you need replace one.

no power reset the unit... pin hole is in the back of the sc101. If the green light has never been on, you have a dead duck / DOA. Either the Power supply or SC101 box (or both) is defect. Contact to ...

sc101-00 error message sc101-00 just check the exposure lamp maybe busted

functional problem sc101 SC101 is an exposure problem.check if at on of the machine exposure lamp is light in a few sec. then off then follow this as a guide SC101 D Exposure LampError At trigger on, ...

Ricoh photocopier 1055 code sc101 for sc101 Exposure lamp error The standard white level was not detected properly when scanning the white plate.

my aficio 1022 is showing code sc101. How can I fix it SC101 is scanner home position error. Check the sensors or the white plate, usually its dirty.