Questions & Answers for: samsung front loader washer problems

Samsung front loaders and they made the same sound. Finally I rotated the drum on a few competing brands of front loaders and they did not make the sound. Hum....is this a Samsung design thing. I have

samsung washer wf218anb/xaa has code dc and wont spin clothes they are still wet The DC error code is an unbalanced laundry error. Try putting less clothes in and if that doesn't fix the problem, then

...washer WF218ANB started leaking around the bottom of the door seal a few weeks ago. The washer was installed early November '09. The seal looks ok. Any ideas on the solution? A repair person told my ...

samsung wf218an washer WF218ANB: http://www.samsung.com/us/support/downloads/WF218ANB WF218ANB/XAC: http://www.samsung.com/us/support/downloads/WF218ANB/XAC WF218ANW: http://www.samsung.com/us/support

Samsung told them they couldn't use this washer in places where the temperature got below 60 degrees because it's temperature sensitive, somehow. But the overwhelming reports on this model are good. I

MY WF218ANB/XAA WON'T DRAIN BETWEEN WASH AND SPIN CYCLE, AND GIVES ME AND ND CODE Hi gumby323, Drain pump may be clogged. Please follow my below tip on the fix: ACCESS, DRAIN & CLEAN THE DRAIN

Samsung front loader washer Model: WF306LAW the washer will not turn the hole tank it will only go 1/4 of the way around and come back and show 3E The "3E" error code indicates that a high current is ...

Samsung Front Loader WF218ANB error code FL (failure to lock door) but door is locked and will not unlock. Used to happen only on Sanitize cycle. Now occurs on all cycles. Unlocking the door takes ...

Samsung vrt front load washer WF218ANB/XA Burned up the drain pump. Installed a new one, now washer will work until the spin cycle. In spin cycle the door lock clicks and it will not drain or spin ...

my samsung vrt front loader is out of balance. The machine itself is balanced, but spin is not balanced if anything is in the washer. top loader or front loader is the data missing