Questions & Answers for: Dodge Stratus rough start

rough idle w/check engine ligth on. Showing a P1684 error code. your code doesn't help your rough idle, P1684=The battery has been disconnected within the last 50 starts CODE P1684 - MEANS BATTERY HAS

...rough idling. as they age they tend to leak, meaning the soark jumps out of the casing to a point one the engine its not supposed to. Start there and if u have a check engine light see whats thats on ...

Idles rough but not all the time and throws up a p0440 code I trew up a cam sensor code once. I have a list of the freeze frame code problems. Fuel system 1 -- cl Fuel system 2 -- n/a Calc Load --- ...

we put new timing belt in the car started fine then it started idel rough we put new plug wires in and run it for a bit and it it came up with the code p0491 we put amanifold senser in and cleared the

...cold starts are rough. just purchased. 148.000 miles Hi Ronald, take the vehicle for a diagnostic read out. Seems you have a problem with a temperature sensor or the cold start up idle. Regards ...

2000 Dodge stratus running rough. Changed plugs. Ran good for about 5 miles. Then car startrd running rough againwith check engine light flashing on and off. What is the problem? Car running rough. ...

...rough in drive or reverse when sitting still. When you cut the wheels it stalls out. I'd start by checking the idle air control valve, google it for your car and it will give you location, unplug it ...

...rough through each state, including Drive, Park, and Neutral, but you'll only really notice it when you're transmission is engaged. Anyway, there are only 2 things that can cause a misfire: ignition ...

misfire cylinder 1 My Dodge stratus r/t 3.0 5 speed started running rough while driving it idles fine but when I put it in 1st gear and go to take off it starts to bog down and falls on its face ...

...rough then died. it turns over but will not start. what could be causing this if now it won`t start it could be a spark(ignition)problem, check for spark at the plug. you should check for a code in ...