Questions & Answers for: Mitsubishi Endeavor rotor head

Im trying to install a new rear hub assembly and cannot get the rotor off. Any sugestions. Remove the rotors. Rusted rotors will most likely stick to the car due to the iron oxidizing and bonding to ...

changing front brakes on 2004 mitsubishi endeavor Do I need to take off the front cv axle nuts in order to take off the front rotors. if you have floating rotors in the front then no. But if you have ...

Can't get rear rotors off... I can't get the rear rotors off my 2004 Mitsubishi Endeavor. there should be two holes in the rotors that will be threaded. send two bolts in them a little at a time to ...

front rotors on 2004 mits endeavor i need to replace front rotors but phillips screws are frozen what is easiest way to loosen and do you turn left or right to loosen? thank you you turn them left to ...

...rotor to the wheel assembly. Need to know the name of he tool that release the philip head screw. Mitsubishi Endeavor 2004 If you can see the head of this screw, drill it out and retap the threads ...

HOW TO CHANGE REAR ROTORS ON A 2004 MITTSUBISHI ENDEAVOR NEED TO KNOW HOW TO DO THIS Take the wheel off. Remove the two 14mm bolts holding the caliper bracket on. They are the two farther inboard, ...

Rotors How do i change the rotors? You have to obviously remove the tires, then remove the brake caliper by taking to 2 bolts off that hold the calipers onto the hangers. Once the calipers are off the

Antilock light stays on an breaks feel wierd abs senser in back of rotor couple of screws a plug and a new senser

are the bolts to remove the front rotors on a 2004 mitsubishi endeavor reverse threaded never seen left handed threads on a brake disk ,use a impact driver as they are tight to remove and if that ...

when i pressed the brake while drivving , the pedal and steering wheel vibrates Check the front rotors and brake pads.  Ours did the same thing.  Replaced the rotors and pads and cured the ...