...rare my response thank you very much I wish i knew..still have all the brand new front and back rotors and pads inside the car. Couldn't get the caliper bracket lose. By the way, can anyone tell ...
Question about 2004 6
rotor on while installing brake calipers. They can be left off but not recommended, Soak the screws with penetrating oil for a hour or so and use a impact driver (#3) to remove stubborn screws. I have
...rotor. Use the impact screwdriver in the reverse position with a Phillips head bit and strike the end of the screwdriver with the hammer. Remove the screw. Remove the rotor. If it is stubbornly stuck ...
...bridge this will be held on to the steering knuckle with two bolts. with this removes you have to remove the philips head screw that hold the rotor to the hub then the rotor will come off the
head. It will be on the face of the rotor between two lug studs. some rotors are held on by two phillips screws if there are no screws then rotor is rusted to the hub use a piece of wood and hit rotor
Usually answered in minutes!
738 Questions
454 Questions
386 Questions
293 Questions
74 Questions