Questions & Answers for: Acura CL rotor head

The dealership service dept. told me I needed new brake rotors+. 2003 Acura TL typeS w/ 97k mi. - Six months ago, while dealing with another issue I was told I needed new wheels (one was bent), a ...

I Cannot get the rotor off the front of my 97 Accura2.2CL. I removed the four bolts holding the rotor to the hub, and the large nut holding the cv joint to the hub. The hub will still not come off so ...

1997 acura cl cant get the front rotors off can you tell me step by step how to do it so i can make sure that i am doing it right I believe these rotors are pressed on. Removing them would need a shop

my braking when I'm stopping I've got quite a bit of shake in the steering wheel. I have turned the rotors and replaced the pads three times. I went and got a set of calipers from a junkyard to put on

Should struts, rotors, brake pads be replaced when springs are replaced on a car? No. There is no telling when? or if any of those has been replaced before. Replace worn parts, retain serviceable ...

how do I replace front brake rotors on a 1997 acura 2.2cl. how do I remove front brake rotors. Are they pressed on or can I do this at home? Good job, P48. I had to drill out the head (s) of the ...

I have a the dim head light out. what do I have to do to put a new light in? what needs to be taken apart, and can I do it myself? If the head light is just dim, open the fuse box and you'll find one ...

...head lock screw in the rotor. Which gets very "stuck". Once that is removed, they pop right off. You may need an impact driver with a phillips (star) head like I needed. Got mine at AutoZone. Hope ...

Recently replaced rotor on front driver's side, now there is a loss of brake pressure and clanking sound coming from it. I've looked at it, and cant see anything significant. That is not good. Brake ...

steering wheel shake If it shakes when braking, your front brake rotors are warped and must be resurfaced to correct the issue.