Questions & Answers for: Hyundai rotor head

...head screw that holds the rotor to the hub. You have to remove that and then with some persuasion the rotor will come off of the hub just like most other rotors. The studs, however, stay with the hub ...

rotor is secured to the hub by 2 posidrive or torque head screws unscrew and then you may have to tap the rotor from behind to remove ? re assembly is the reverse of above ok? now whilst stripped down

...rotor seems to be blocked by the internal parking brake. you have to adjust the parking brake down, using a flat head screwdriver you must turn the starred adjuster wheel counter clockwise to adjsut ...

use a big nut, like the one on the axle) put big nut over stud and screw lug nut on stud and tighten until head of stud is flush with hub. Re-install rotor, caliper bridge and caliper. Hope this helps

2003 hyundai elantra brake rotor removal havin trouble takin off rotor from hub please help thanks if there are screws holding rotor on remove them.you can drill the heads of if you need to they realy

How do I remove the screws from the front rotors of the xg300? MIne are tight and rusted, the material is soft so the screw heads are about to be ruined. I can see me having to drill them out. I am ...

...head of bolt and remove disc/rotor these bolts are onle fitted to keep the wheel bolt holes in line with rotor when wheel is removed so play no part in braking !hope this explains clear to you ...

how to change the front brakes rotor Hello, if there are screws holding rotor on, remove them.You can drill the heads of if you need to but they really don't do any thing remove caliper bracket if its

...rotor but wont come off. Noticed two phillips head screws on rotors and wandering whether or not I have to remove these two screws in order to take the rotors off or is it the rotors are simply stuck ...

both front wheel roters are stuck What do you mean stuck? When I went to replace my rotors the first time on my 2006 I discovered 3 brass flat head screws in the Rotors. I literally had to drill the ...