Questions & Answers for: Ford rotor head

Question about 2003 Expedition

2 Answers

brake rotors is there a special way or a tool to remove the rotors They get rusted to the hub. Try heat and a large hammer. I have a 99 expedition and just replaced my front brakes and ball joints ...

Ad

Question about 2002 F250 Super Duty SuperCab

3 Answers

...head "allen" wrenchs......and get the anti squeek stuff...just ask the auto parts place where you'l get your pads from.....other than that, do only 1 side at a time. Do not get greases or oils on the ...

Ad

Question about 2002 F250 Super Duty SuperCab

3 Answers

...rotor you may see a screw head on it. If not they may be rusted on just use some WD 40 or breakfree to help loosen the rotors There may still be a ring on one of the wheel studs. OR there is a ...

Question about 2000 Windstar

1 Answer

Ford How To Take Off Front rotors Ford Windstar 2000 Problems How To Take Off Front Rotors Five Headed Retaining Bolts? Torque Bolts heat them up ?? will not move broken 4 torque heat the bolts a ...

anything special about removing the front rotors? The rotors are often rusted onto the wheel hubs and will stoutly refuse to come off. If they are rusted enough to be in this condition we always ...

sorry on 2004 ford exploer xlt 2 wheel drive. cant get rear rotor off. most likely the parking brake shoes on the inside drum of the rotor are hanging up you can grind the heads off the nails that ...

Question about 1997 F250 SuperCab

1 Answer

...head capscrews. Remove the lock ring seated in the groove of the front disc brake hub and rotor (1102). Remove the hub body assembly from the front disc brake hub and rotor. If the body is difficult ...

Question about 1997 F250 SuperCab

2 Answers

...head & gaskets were ok.you can spray carb cleaner around intake to see if its a vacuum leak.cap/rotor easy enough to check.plug gap is preset .45 (i think)so unless they were drpped should be ok ...

Question about 1991 Festiva

1 Answer

takeing off frount rotors not sure what holds frount roters on On some cars the rotors are held on by the wheels and a set screw-others by bolts-others are part of the hub. Remove the wheel and if you

...was gave to my grandpa with a cracked head so he bought a junk yard head wit about the same miles and let the truck sit for 8 months and the coil is firing but not so hot to the plug wires rotor or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...