Questions & Answers for: rotor damage

Ad

Question about 24 in. DD603H W Built-in Dishwasher

1 Answer

Fisher & Paykel Model DD603 Top drawer makes grinding noise while running. Most likely the rotor is either damaged or there is some debris sitting in the rotor cavity. Follow the instructions in ...

Ad

Question about 24 in. DD603H W Built-in Dishwasher

1 Answer

...from thumbsupuk Do you have any solutions for this? Thanks Make sure that the balancer wheel/rotor at the rear is not damaged while it had the fall/hit. If so make sure that the tails is ...

Ad

Question about 2004 Grand Cherokee

2 Answers

...rotor damage and warpage. Damanged Wheel Hub SpindleA brake rotor assembly is supported by and rides on a long, slender metal tube called a hub, or wheel hub assembly. The hub is what allows for the ...

Question about Fisher Paykel Intuitive Eco Washer IWL15

1 Answer

...error codes 240 and 130. what does this mean? The fault codes 130 and 240 are pertaining to a Rotor Position Sensor problem. It is the part located wedged into the motor stator and it's

Question about 2010 Genesis Coupe

1 Answer

...on backing plate against inner lip of rotor, rotor depth is set by hub, disassembled reassembled, torqued 3 times no change,what else besides the rotors, assuming no damage, could it be Wrong ...

Question about WM1814CW Front Load Washer

1 Answer

8 YEAR OLD LG FRONT LOAD WASHER WONT SPIN OR DRAIN If the washer won't spin the stator or rotor assemblies at the back of the washer tub might be bad or damaged. The rotor is essentially one half of a

Question about WM2487H Front Load Washer

1 Answer

...washer won't agitate the stator assembly at the back of the washer tub might be bad or damaged. The rotor is essentially one half of a motor, it interacts with the tub by creating a strong ...

Question about WM-1832C Front Load Washer

1 Answer

...doesn't want to vibrate Want wash or drai If the washer won't agitate or spin, then the stator or rotor assemblies at the back of the washer tub might be bad or damaged. The rotor is essentially

...washing and keeps flashing 5E just switching on and off If the washer won't agitate the stator or rotor assemblies at the back of the washer tub might be bad or damaged. The rotor is essentially

Question about WM-1832C Front Load Washer

1 Answer

...according to their design, if faulty replace. (2) If the washer won't spin or agitate the rotor assembly at the back of the washer tub might be bad or damaged. The rotor is essentially one ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...