Questions & Answers for: rocker cover

...rocker arm cover from the RH cylinder head, disconnect PCV closure tube from oil fill stand pipe at rocker cover. Remove the Thermactor bypass valve and air supply hoses as necessary to provide ...

Ad

Rocker arm cover using a new gasket and tighten the rocker cover bolts to 89 inch lbs. (10 Nm) PCV valve to the rocker arm cover Coolant tube with the thermostat bypass hose and tighten the bolt to 98

Ad

Question about 2005 XL 1200 R Sporster Roadster

1 Answer

...rocker cover on the front clinder. Remove the large bolt that hold the lower plate and the rocker arm for the front cylinder in. Tap the rocker arm shaft out of the rocker arm and remove the rocker ...

Question about 2005 XL 1200 R Sporster Roadster

1 Answer

...(32 Nm). * Remove the lash adjuster retaining tools. * Install the rocker cover and tighten the mounting bolts to 30 inch lbs. (3 Nm). * Reinstall the spark plug wires to the spark plugs. Hope

...rocker cover gasket or can i use old one and when finished how tight do you do rocker cover nuts is it easy as im not good with engines daz cx500 custom 1981 hi, the rocker cover gasket can be reused ...

Question about 2001 XG300

2 Answers

...rocker cover It is most probably the rocker cover gasket. This is enough to install, you just need to source the correct part from your local parts store or dealer. Remove bolts and rocker cover and ...

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

...Rocker Cover gasket for your Engine Code located at top of motor nameplate) Drain Oil. 3 pints SAE 30 Remove OHV rocker cover 4 bolts carefully and remove rocker cover and toss old gasket. Clean ...

Question about 1986 Magna

1 Answer

...Rocker Cover area. New Seal and Rocker cover gaskets fitted. did not fix , is there a seal on the Cam shaft ? which would cause this problem yes there is a seal on the cam shaft behind the water pump ...

rocker cover. repaired 3 times. is this a common fault? what is the solution? The rocker cover will leak oil.............. 1. If the rocker cover has been damaged due to poor mechanical fitment and is

rocker cover toque settings please? Question edited for clarity Question moved to model category Torque specs. - Harley Davidson Forums harley-davidsonforums.com https://www.harley-davidsonforums.com

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...