Starter wont engage ring gear. I have a 2003, Mazda 6, 3.0 that wouldn't start. I knew the starter was going because it would make noise after the engine started during retraction, so I fugured I ...
...starter: Usually it will start first try, but sometimes it will not turn over--like it won't if you don't disengage the clutch. Then, occasionally, after it starts, a sound like a motor with sand in ...
...a week.sounds like the starter needs to be shimmed if its a hard start and a grindind noise thats what it sounds like to me get some steel shims and reset the starter until it starts easy with no ...
Question about 2000 Jetta TDI
...sound is the starter motor gear overrevving as it's being spun by the now quickly rotating starter ring. I'm not sure if the starter ring gets any damage from this. I've had the noise for several ...
...grinding sound of the starter. After a few try's it would start. Then it wouldn't start. Got it towed, replaced the starter...same problem....Any suggestions?? sounds like ring gear or fly wheel to ...
Question about 2000 Grand Marquis
...STARTS FIRST TIME Sounds a bad starter that may have damaged the ring gear on the flywheel. When it grinds like that the starter is not fully engaging the ring gear and could have damaged it. The ...
...sound sometimes when trying to start have to move in gear then its ok The starter is not engaging with the flywheel, sounds like teeth missing on starter ring gear, when you move the car in gear, you ...
starter grinding flywheel Just had a new flywheel and clutch installed. Car sounds like a diesel now when I start it but goes away as soon as it starts. Tech says its because flywheel gears arent ...
starter on my Ford windstar a few times and it runs. a lil and it starts whinning my started does or makes a terrible cracking sound.changed srarter and flywheel and drove it about 10 miles and when I
Question about 2008 Impreza Wrx
...won't start and the grinding sound isn't that loud. If teeth on starter are no longer0somehow sounds like the starter and or ring gear have been stripped , need to have starter remove to inspect ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions