Questions & Answers for: rid rust microwave door

...rust, then sand and clean as best as you can. If you have any areas rusted through - get rid of the microwave. Use the paint sparingly - don't try to cover in one or two coats. Best results are ...

...microwave is only about 3 or 4 years old. Wish I'd kept the receipt so I'd know. Many thanks. just use sand paper to clean the rust then use some high temperature paint (sold in tins) eg spray paint ...

door rusted very badly. Can I paint it? Yes you can paint it.. Begin by removing the rust with either a wire brush or a thick paste product called naval jelly. Then prime the area and finally paint it

Rust in the ceiling, corners of microwave; also on the door There is rust on the corners and the ceiling of the interior of the oven. I read someone recommend a microwave interior paint (part 277) ...

...microwave has a small rust mark on the door & the inside rim. When I open the microwave door the marks are on the trim near the hinges. The marks are not actually on the inside the microwave. ...

...rid of the rust. If any rust remains, you can use Rust Reformer paint to stop the rust process, then sand it smooth when it's dry. Then you can apply some high-temperature appliance paint, available ...

...Is there a way to access the inner surface to rid grid of rust? It would appear that no one knows how tofix this problem. I have the same problem and the only sugestions I get is to replace the

...rust in my microwave - is it now safe to use Too generic...Did you use the high-temp appliance enamel recommended, or a spray...or worse? Was the rust inside where it can contact food through the ...

...rid of the rust-like streaks? Disassembling the door is a major pain and the streaks will likely only be faded not removed completely. Best solution is replace the door. Otherwise taking it apart(and ...

...MICROWAVE AND IT HAS RUST INSIDE THE DOOR ON THE METAL SCREEN, HOW CAN i REMOVE THE RUST? Have to replace the inner door, some of those are available as a complete door assembly. Unit must come down ...