Questions & Answers for: reverse wire Audio Players & Recorders

Ad

Question about Conveyor Oven - 1133-000-A

2 Answers

model 1456 n19811 how to reverse conveyor lincoln 1456 n19811 how to reverse conveyor direction If it's 3 phase, just reverse 2 of the 3 motor feed wires. It doesn't matter which 2. If it's single ...

Ad

Question about 1999 Camry

2 Answers

...safety switch, Checked wire harness at left trunk hinge and found broken wire. repaired wire and now have all lights working and no check engine light and no dash reverse light when head lights were ...

Ad

...reverse light wire, black to ground and obviously video wire to the video in on the unit. but the problem arose with that rear cam 12v dc wire on the back of the unit. It NEEDS to be connected to the ...

is usually for earth wire. The fitter may have just used another white wire for reverse light. use a test light or multimeter to see if you have positive power to the extra white wire while in reverse

Question about PHKJ048-1 Air Conditioner

2 Answers

wire from normally closed terminal on relay to reversing valve. What this does is reverse the contacts. So ur heat pump will work normal and also be able to go threw a defrost cycle as well. Hope this

Question about PHKJ048-1 Air Conditioner

1 Answer

...reverse wire need 12vdc to make the dvd player function. This is for an xo Vision XO1930. no im guessing that you are asking this because you cant be bothered to strip the car down for one wire? i ...

Question about PHKJ048-1 Air Conditioner

1 Answer

...reverse wire and parking brake wire i still have no power to the unit is it because of those wires? i don't know were to wire them to , also what is the reverse wire is it for the back up camera? ...

Question about PHKJ048-1 Air Conditioner

2 Answers

wire connector on the transmission or transaxle, although it may be included in a wiring harness for the transaxle. If you find the two wires for the reverse light switch, you can jumper the two wires

Question about PHKJ048-1 Air Conditioner

1 Answer

locating wiring for reverse Installing a reversing camera & monitor - part of the process is to tap into the wiring from the gear box for when reverse is selected, camera will be activated. While ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...