Questions & Answers for: reverse sewing level

...When I push teh level for reverse it does go in reverse. I guess the question would be if you would like to lengthen the stitch further than the dail currectly allows how do you do that.

sewing machine only sews backwards When I push in the "backwards" button, the feed dog doesn't move at all. Make sure that the machine is in straight stitch forward and the stitch length is the ...

sewing machine. When i use the reverse level, the material moves fine. When i try to sew forward, I see the feed moving but it does not puch the material. I do not have the button holer attached and I

...sewing machine, #423S that I have never used. It is second hand. It sews nicely, but I cannot find the reverse lever on it The reverse lever should be below the stitch width lever. (It's a wide lever ...

...way into the negative area and you will get a reverse stitch of about 2.5 or so. Do your reversing stitches, then stop and turn the dial back to original forwards stitch location, and continue

...level several times, machine went into reverse, found button at back of motor and switched in opposite direction. Machine now forward going but will not stitch, have checked bobbin etc, please help ...

...sewing machine thank you. Wanted to change stitch length so turned wheel and clicked front level several times, machine went into reverse, found button at back of motor and switched in opposite ...

forward /reverse direction level/knob in the center position Yes, according to the manual (pg 16):



Actually, the feed dogs do not drop, but rather the needle plate is raised.

.

...reverse sewing level in my shark 7133 is not working the machine don't sew forwards Hello Salome, The reverse lever may be 'stuck'. Gently press down to see if it will release. Now gently push it up ...

...reverse button on the right side (motor section) of the sewing machine. It's roughly on the same level as the sewing bed below the stitch width indicator window. Press and hold the button for the ...