...feed dogs move forward. Press the reverse lever and see if they move backwards. Select straight stretch stitch and turn the wheel to see if the feed dogs move forward and backward.Check the presser ...
Question about 4423 Sewing Machine
...Reverse feed dogs on Singer 4423 Remove extension table so you can see switch on BACK of machine @ left side. Flip switch to raise feed dogs up. If machine actually sewing in reverse - check ...
Question about Viking 1
...feed dogs reverse their rotation (feed rearward). The problem probably relates to the drive thats shifts the linkage to reverse the feed dogs (although it could be the linkage itself is out of wack). ...
...reverse is not the feed dog, the feed dog is in the needle plate area. under the needle when the reverse button is broken the machine must be taken apart and another put in it's place, at a sewing ...
...reverse is caused by old sticky oil at the feed dog pivots. Oil your machine with only high quality sewing machine oil. Pay close attention to the two pivots under your machine where the feed dogs ...
...hand wheel and push the reverse button. See if you can spot what's preventing the feed mechanism from reversing its rotation. Hopefully it's as simple as material or thread buildup in the
Question about Viking 1
feed dog issues, my Bernina 1260 will not reverse and stitching length is erratic. The zigzag is also not consistent and the stitch for button holes is also erratic. This is all a new phenomenon. I ...
Question about Viking 1
...diagnostic test and the feed motor test passed. When I press the reverse feed button the feed dogs go in the forward motion. Can you use it the way it is? As long as it does both forward and
Question about Viking 1
Elna 3005 will not see forward or in reverse, what could be the problem and where is the feed dog adjustment? Feed dog latch should be under the feed dogs, usually behind a flip out cover.
Question about Viking 1
...Reverse is effected by changing feed dog engagement. Try lowering and raising feed dogs to see if problem clears. You might also try to clean the bobbin, hook, and feed dog area with a vacuum to ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions