Questions & Answers for: rest canon mp160

Canon Pixma MP160 and i checked everything and it seems ok but when i print it takes half of the paper and then it shows the lettle E and i check the paper and its intact. Please help me. I don't know

...the ink absorber? you have to open the printer and check the place where the cartridge use to rest, below that you will find sponge you have to take it out and wash n dry it and put it ...

...rest position of the ink cartridge carrier. The lever is actuated by the ink cartridge carrier when it moves to the right. If the lever is not actuated, the motor drive will never engage the large ...

...canon.com/printer/prob676ijt65/solution prirweto-i-25 i can print I had same error and tried the reset fix shown elsewhere on this site. It did not fix the problem. The problem was mechanical as the ...

...rest position of the ink cartridge carrier. The lever is actuated by the ink cartridge carrier when it moves to the right. If the lever is not actuated, the motor drive will never engage the large ...

...rest position of the ink cartridge carrier. The lever is actuated by the ink cartridge carrier when it moves to the right. If the lever is not actuated, the motor drive will never engage the large ...

mp160 flashing error E then 3 does not respond to anything I do to rest it E3 - paper jam! check paper chek sensors

Cleaning Ink Pads where Catrigdes rest Is this a statement ... might erhe be a question lurking inside? Im sorry, I dont see a question here. I cannot answer a statement. Good questions get good ...

...CANON MP140, MP145, MP150, MP160 ERROR CODES RESET ERROR CODES CANON MP140, MP145, MP150, MP160 E2-2 = No paper (ASF) E3-3 = Paper jam E4 = No ink E5-5 = The ink cartridges are not installed or a ...

canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp190#DriversAndSoftware , get the drivers and then also MP Navigator EX software for scanning, the rest of the software is