Questions & Answers for: resetting fuel trim

trim and reset the fuel pump shutoff switch by pushing in the button on the switch. 4. Turn the ignition to the ON/RUN position. Pause for a few seconds and return the key to the OFF position. 5. Make

Ad

Fuel Trim System Lean = In closed loop the PCM adjusts fuel delivery based on H2OS 1 readings and is indicated by long & short fuel trim values. If lean the PCM will add fuel (fuel trim above 0%)

Ad

...on a 2002 ford expedition the reset button of the fuel is located is under the clove compartment near the door trim passenger side.remove the plastic door trim,u see the red push button type ...

Question about 1995 Escort

2 Answers

...switch by hand before you can start your vehicle. The fuel pump shut-off switch is located behind the right rear trim panel in the trunk. You can reach the switch to reset it through the access

fuel pump for lincoln town Without having a year to narrow the search, it is usually located either in the trunk....there will be a hole in the side cover carpet and it will be labeled that the button

...Resetting the switch CAUTION !!!: To avoid the possibility of fire or personal injury, do not reset the inertia switch if you see or smell fuel. If no fuel leak is apparent, reset the inertia switch ...

Question about 2003 Maxima

1 Answer

fuel reset button reset button for the fuel pump what in the world is a fuel reset button? if you are referring to the long term and short term fuel trims within the pcm you would need a factory scan ...

...button on a nubria deawoo Remove the passenger side front rocker trim panel. Remove the lower B--pillar trim panel. Reposition the carpet. There is the fuel cutoff inertia switch with reset

...fuel trim (bank1) what does this mean code p0170 refers to two problems fuel trim bank 1 --malfunction heated oxygen sensor(HO2S) 3 bank1 --circuit malfunction for the first error==causes-- intake ...

...fuel trim in a 2006 gmc 4.2 Envoy SLE fuel trim is set by the ECM during running operations and is not adjustable unless you have the computer and program to reset the parameters for the ECM maybe if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...