Purge unit error Reset procedure: Service mode operation procedures : 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset
...reset. is it that easy? Hi Try this out The 6A00 is a Canon generic code for paper path jam. Solution 1: Move the printhead carriage back and forth a few times. Solution 2: Check the purge unit: ...
purge unit, called a spittoon assembly in an HP, lexmark, and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head
Question about PIXMA MP530 All-In-One InkJet Printer
...reset and reinstalled software. Hello there Error 6A00 The 6A00 is a Canon generic code for paper path jam. Solution 1: Move the printhead carriage back and forth a few times. Solution 2: Check the ...
...purge unit error Reset will not clear a purge unit error. Sometimes you can remove the purge assembly and clean out all the ink covering the moving parts. You clean with just water, most times I just ...
Question about PIXMA MP830 All-In-One InkJet Printer
...reset, checked for jams, etc, but no results? Any clues? It is a MP830 Canon, with a bit of printing time, probably several thousand total documents by now. The error code just came on after several ...
Question about PIXMA MP600 all-In-One InkJet Printer
...reset. Hi try The 6A00 is a Canon generic code for paper path jam. Solution 1: Move the printhead carriage back and forth a few times. Solution 2: Check the purge unit: Moving the print head assembly ...
Question about PIXMA MP530 All-In-One InkJet Printer
...purge unit as much as I could, then wipe it dry with a few pieces if dry paper towel. Then I tried to turn on the printer, and voila, it did reset successfully. 6A00 error message disappeared. Thank ...
resetting the ink purge counter sir, i have the printer canon pixma 308 n i want to rset the ink purge of the printer please provide the resetting code ...
...reset button, but no koy. Any ideas? 6C10 error (valve cam sensor error) is a mechanical problem in the purge unit area where the valve cam sensor is located (on the purge unit just behind the power ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions